Product ID:L-TEC UNIONMELT SUBMERGED ARC WELDING FLUXES, 709-5
MSDS Date:09/08/1995
FSC:3439
NIIN:00N079310
MSDS Number: CFPKK

ESAB GROUP INC

801 WILSON AVENUE
HANOVER, PA 17331
US

Emergency Phone: 717-637-8911

Info Phone: 717-637-8911

Cage: HO829

ESAB GROUP INC

517 HANOVER, PA 17331 US

Telephone: 717-637-8911

Cage: HO829

MANGANESE OXIDE; (MN*O)

CAS: 1344-43-0

RTECS: OP0900000

Fraction By Weight: 40%

OSHA PEL N/K

ACGIH TLV: N/K

SILICA, CRYSTALLINE - QUARTZ; (SIO2)

CAS: 14808-60-7

RTECS: VV7330000

Fraction By Weight: <45%

OSHA PEL SEE TABLE Z-3

ACGIH TLV: 0.1 MG/M3 RDUST;9495

CALCIUM OXIDE; (CA*O)

CAS: 1305-78-8

RTECS: EW3100000

Fraction By Weight: <50%

OSHA PEL 5 MG/M3

ACGIH TLV: 2 MG/M3; 9495

IRON; (IRON OXIDES)

CAS: 7439-89-6

RTECS: NO4565500

Fraction By Weight: <2%

OSHA PEL N/K

ACGIH TLV: N/K

CALCIUM FLUORIDE; (FLUORSPAR- FLUORIDES INCLUDING #6)

CAS: 7789-75-5

RTECS: EW1760000

Fraction By Weight: <10%

OSHA PEL N/K

ACGIH TLV: N/K

SODIUM FLUOALUMINATE; (FLUORIDES)

CAS: 15096-52-3

RTECS: WA9625000

OSHA PEL N/K

ACGIH TLV: N/K

MATL BEING WORKED (SUCH AS PAINT,

RTECS: 9999999ZZ

AREA, QUALITY & AMT OF VENT, POSITION OF WORKERS HEAD

RTECS: 9999999ZZ

CONTAMINANTS IN ATM (SUCH AS CHLORINATED HYDROCARBON

RTECS: 9999999ZZ

ARE CONSUMED, FUME & GAS DECOMP PROD GENERATED ARE

RTECS: 9999999ZZ

SECTION II. DECOMP PRODS OF NORMAL OPERATION INCL

RTECS: 9999999ZZ

OF INGREDS, PLUS THOSE FROM MATL BEING WORKED &

RTECS: 9999999ZZ

PRODS FROM NORMAL USE OF THESE PRODS INCL COMPLEX OF

RTECS: 9999999ZZ

AS WELL AS CARBON MONOXIDE, CARBON DIOXIDE, &

RTECS: 9999999ZZ

FUME" AVAIL FOR AMERICAN WELDING SOCIETY). TLV FOR

RTECS: 9999999ZZ

LIM FOR WELDING FUMES OF 5 MG/M3 IS REACHED. ONLY

RTECS: 9999999ZZ

IS BY SAMPLING & ANALYSIS. COMPOSITION & QTY OF

RTECS: 9999999ZZ

DETERM FROM SAMPLE OBTAINED FROM INSIDE WELDER'S

RTECS: 9999999ZZ

"METHOD FOR SAMPLING AIRBORNE PARTICLES GENERATED BY

RTECS: 9999999ZZ

FROM THE AMERICAN WELDING SOCIETY.

RTECS: 9999999ZZ

PROPORTIONAL TO LENGTH OF EXPOS. CHANGES

RTECS: 9999999ZZ

REDUCED LUNG FUNCTION/DISEASE. FOR MORE SPECIFIC

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE: GASES, FUMES & DUSTS MAY INCL
IRRIT OF EYES, LUNGS, NOSE & THROAT. SOME TOX GASES ASSOCD
W/WELDING MAY CAUSE PULM EDEMA, ASPHY, & DEATH, ACUTE OVEREXP MAY
INCL SIGNS & SYMPS SUCH AS WATERY EYES , NOSE & THROAT IRRIT,
HDCHS, DIZZ, DFCLT IN BRTHG, FREQUENT COUGHING/CHEST PAIN. DUST
GENERATED (EFTS OF OVEREXP)
Explanation of Carcinogenicity:SILICA, CRYSTALLINE-QUARTZ:IARC MONO,
VOL 68, 1997:GROUP 1A. NTP 7TH ANNUAL RPT ON CARCIN, 1994:ANTIC TO
BE CARCIN.
Effects of Overexposure:HLTH HAZ:FROM POURING/OTHERWISE HNDLG FLUX MAY
ALSO CAUSE IRRIT OF EYES, LUNGS, NOSE & THROAT. INGEST OF BARIUM
OXIDES CAN RSLT IN SEV PAIN, VOMIT, PARALYSIS & DEATH. CHRONIC:TO
AIR CONTAMS MAY LEAD T O THEIR ACCUMULATION IN LUNGS, CNDTN WHICH
MAY BE SEEN AS DENSE AREAS ON CHEST X-RAYS. SEVERITY OF CHANGE IS
(ING 21)
Medical Cond Aggravated by Exposure:INDIVIDUALS W/ALLERGIES/IMPAIRED
RESP FUNCTION MAY HAVE SYMPS WORSENED BY EXPOS TO WELDING FUMES.
HOWEVER, SUCH RXN CANNOT BE PREDICTED DUE TO VARIATION IN
COMPOSITION & QUANTITY OF THE DECOMP PRODS.

First Aid:IN CASE OF EMER, CALL FOR MED AID. EMPLOY FIRST AID
TECHNIQUES REC BY THE RED CROSS. INGEST:CALL MD IMMED . EYES:IMMED
FLUSH W/POTABLE H*2O FOR MIN OF 15 MIN, SEEK ASSISTANCE FROM MD .
SKI N:FLUSH W/COPIOUS AMTS OF H*2O. CALL MD. INHAL:IF BRTHG IS
DFCLT, GIVE OXYGEN & CALL FOR MD. FOR ELECTRIC SHOCK, DISCONNECT &
TURN OFF POWER. FOR MORE SPECIFIC INFORMATION CONTACT NEHC .

Extinguishing Media:THIS PROD WILL NOT BURN, HOWEVER, WELDING ARCS &
SPARKS CAN IGNITE COMBUST & FLAMM MATLS. USE EXTING MEDIA REC
(SUPDAT)
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Spill Release Procedures:NOT APPLICABLE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:READ AND UNDERSTAND THE MANUFACTURER'S
INSTRUCTIONS AND THE PRECAUTIONARY LABEL ON THIS PRODUCT.
Other Precautions:SEE AMERICAN NATIONAL STANDARD Z-49.1 "SAFETY IN
WELDING & CUTTING". PUBLISHED BY AMERICAN WELDING SOCIETY, P. O.
BOX 351040. MIAMI, FL 33135 & OSHA PUBLICATION 2206 (29 C.F.R.
1910). U. S. GOVT PRINT ING OFFICE, WASHINGTON, D.C. 20402.

Respiratory Protection:USE RESPIRABLE FUME RESPIRATOR OR AIR SUPPLIED
RESPIRATOR WHEN WELDING IN CONFINED SPACE OR WHERE LOCAL EXHAUST OR
VENTILATION DO NOT KEEP EXPOSURE BELOW TLV.
Ventilation:VENT, LOCAL EXHST, TO KEEP BELOW TLV'S IN WORKER'S BRTHG
ZONE. FOR MORE SPECIFIC INFORMATION CONTACT NEHC .
Protective Gloves:WELDER'S GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:ANSI APPRVD EMER EYE WASH & DELUGE SHOWER .
FOR MORE SPECIFIC INFORMATION CONTACT NEHC .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
APPEAR/ODOR:BONDED FLUXES ARE AGGIOMERATED MINERAL & ALLOY PARTICLES,
ODORLESS. EXTING MEDIA:FOR BURNING MATLS & FIRE SITUATION. HAZ
DECOMP PROD:WORKED, PROCESS, PROC & CONSUMABLES USED. OTHER CNDTNS
WHICH ALSO INFLUENCE COMPOSITION & QTY OF FUMES & GASES TO WHICH
WORKERS MAY BE EXPOSED INCLUDE:COATINGS ON (ING 7)

Appearance and Odor:SOLID; FUSED FLUXES ARE GRANULATED GLASS-LIKE
PARTICLES, ODORLESS. (SUPDAT)

Stability Indicator/Materials to Avoid:YES
NONE CURRENTLY KNOWN.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:WELDING FUMES & GASES CANNOT BE
CLASSIFIED SIMPLY. COMPOSITION & QTY OF BOTH ARE DEPENDENT UPON
MATL BEING (SUPDAT)

Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT. DISCARD ANY PRODUCT, RESIDUE, DISPOSABLE CONTAINER, OR
LINER IN AN ENVIRONMENTALLY ACCEPTABLE MANNER, IN FULL COMPLIANCE
WITH FEDERAL, STATE A ND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.